Finished ProductsDrive Spindle TV Series

Belt Drive Spindle Spindle of Lathe Drive Spindle Gear Spindle Drilling Spindles Built-in Spindle Precision Tooling

 

TV40

Specification Ø120 Position — Taper deflection 0.002 mm
Max. RPM 15000 rpm Draw bar force 700 ± 10 kgf Test bar deflection 0.003 mm
Tool holder specification BT40 Draw bar method Gripper Deflection at 300 mm 0.008 mm
Bearing Temperature Control Front Bearing     7012x2 Coolant through spindle (CTS) n/a Dynamic Balancing G1
Rear Bearing      7012x2 Cylinder Standard Installation method Vertical
Bearing Lubrication Oil Air Curtain Standard 　 　
Bearing Preload Position Preload Cooling method Oil 　 　
Bearing Temperature Control Temperature: Under +18℃ Coolant 1000 kca/h 　 　
Drive Direct Drive Cutting fluid nozzles 4 bore(Standard) 　 　

 

Specification Ø140 Position — Taper deflection 0.002 mm
Max. RPM 15000 rpm Draw bar force 1000 ± 10 kgf Test bar deflection 0.003 mm
Tool holder specification BT40 Draw bar method Gripper Deflection at 300 mm 0.008 mm
Bearing Temperature Control Front Bearing     7013x2 Coolant through spindle (CTS) n/a Dynamic Balancing G1
Rear Bearing      7013x2 Cylinder Standard Installation method Vertical
Bearing Lubrication Oil Air Curtain Standard 　 　
Bearing Preload Position Preload Cooling method Oil 　 　
Bearing Temperature Control Temperature: Under +18℃ Coolant 1500 kca/h 　 　
Drive Direct Drive Cutting fluid nozzles 4 bore(Standard) 　 　

 

Specification Ø150 Position — Taper deflection 0.002 mm
Max. RPM 15000 rpm Draw bar force 1000 ± 10 kgf Test bar deflection 0.003 mm
Tool holder specification BT40 Draw bar method Gripper Deflection at 300 mm 0.008 mm
Bearing Temperature Control Front Bearing     7014x2 Coolant through spindle (CTS) n/a Dynamic Balancing G1
Rear Bearing      7014x2 Cylinder Standard Installation method Vertical
Bearing Lubrication Oil Air Curtain Standard 　 　
Bearing Preload Position Preload Cooling method Oil 　 　
Bearing Temperature Control Temperature: Under +18℃ Coolant 1500 kca/h 　 　
Drive Direct Drive Cutting fluid nozzles 4 bore(Standard) 　 　

 

 

TV50

Specification Ø155 Position — Taper deflection 0.002 mm
Max. RPM 10000 rpm Draw bar force 1500 ± 10 kgf Test bar deflection 0.003 mm
Tool holder specification BT50 Draw bar method Gripper Deflection at 300 mm 0.008 mm
Bearing Temperature Control Front Bearing      7016x2 Coolant through spindle (CTS) n/a Dynamic Balancing G1
Rear Bearing      7016x2 Cylinder Standard Installation method Vertical
Bearing Lubrication Oil Air Curtain Standard 　 　
Bearing Preload Position Preload Cooling method Oil 　 　
Bearing Temperature Control Temperature: Under +18℃ Coolant 1500 kca/h 　 　
Drive Direct Drive Cutting fluid nozzles 4 bore(Standard) 　 　

 

Specification Ø190 Position — Taper deflection 0.002 mm
Max. RPM 10000 rpm Draw bar force 1800 ± 10 kgf Test bar deflection 0.003 mm
Tool holder specification BT50 Draw bar method Gripper Deflection at 300 mm 0.008 mm
Bearing Temperature Control Front Bearing      7018x2 Coolant through spindle (CTS) n/a Dynamic Balancing G1
Rear Bearing      7018x2 Cylinder Standard Installation method Vertical
Bearing Lubrication Oil Air Curtain Standard 　 　
Bearing Preload Position Preload Cooling method Oil 　 　
Bearing Temperature Control Temperature: Under +18℃ Coolant 1500 kca/h 　 　
Drive Direct Drive Cutting fluid nozzles 6 bore(Standard)