Finished ProductsGear Spindle GW50
Specification | Ø190 | Draw bar force | 1800 ± 10 kgf | Cutting fluid nozzles | 4 bore(Standard) |
Max. RPM | 6000 rpm | Draw bar method | Gripper | Dynamic Balancing | G1 |
Tool holder specification | BT50 | Coolant through spindle (CTS) | n/a | Installation method | Horizontal |
Bearing Temperature Control | Front Bearing 7020x3 | Cylinder | n/a | ||
Rear Bearing 7018x2 | Air Curtain | Standard | |||
Bearing Lubrication | Oil | Cooling method | Oil | ||
Bearing Preload | Position Preload | Coolant | 1000 kca/h | ||
Bearing Temperature Control | Temperature: Under +18℃ | Taper deflection | 0.002 mm | ||
Drive | Gear Drive | Test bar deflection(300 mm) | 0.008 mm | ||
Position | Raised Sensitivity | Test bar deflection | 0.003 mm |