Finished ProductsDrilling Spindles SD30
Specification | Ø100 | Position | — | Taper deflection | 0.002 mm |
Max. RPM | 24000 rpm | Draw bar force | 280 ± 10 kgf | Test bar deflection | 0.003 mm |
Tool holder specification | BT30 | Draw bar method | Gripper | Deflection at 300 mm | 0.008 mm |
Bearing Temperature Control | Front Bearing 7008x2 | Coolant through spindle (CTS) | n/a | Dynamic Balancing | G1 |
Rear Bearing 7008x2 | Cylinder | n/a | Installation method | Vertical | |
Bearing Lubrication | Oil | Air Curtain | Standard | ||
Bearing Preload | Position Preload | Cooling method | Oil | ||
Bearing Temperature Control | Temperature: Under +18℃ | Coolant | 1000 kca/h | ||
Drive | Direct Drive | Cutting fluid nozzles | n/a |